Make the chip bend less.
Drag the cooling curve or step through 210 evaluated states to find where the model's trade-off hits a wall.
Drag the cooling curve or step through 210 evaluated states to find where the model's trade-off hits a wall.
Hover any layer to inspect · Dashed outline shows comparison baseline.
Separate 3-cycle COMSOL study (−40 ↔ 125 °C) · Independent from 50–80 °C grid above
Move through the four recorded checkpoints to compare all three preconditioning recipes side by side.
Continuous cooling
Linear ramp · no isothermal pause
Pause at 140 °C · 300 s
5-min hold at 140 °C before final cool
Pause at 141 °C · 450 s
7.5-min hold at 141 °C (differs in temp & time)
Study conditions & boundary: All three cases share T_cure = 51.875 °C, 10 °C/min ramp, and 3 thermal cycles (−40 ↔ 125 °C) in full-3D transient COMSOL FEM (nominal constitutive parameters). Note that the 450 s recipe also shifts pause temperature (141 °C vs 140 °C), so differences cannot be attributed solely to duration; this 3-cycle study does not prove satisfaction of the separate 50–80 °C oven-time limits above.